webshop
aei dk 9830 change password
Convertisseur DIC-4-002-C-0003-01

Aei Dk 9830 Change Password [upd] 【2026 Edition】

€1.354,60 VAT EXCLUDED
Référence: 71999533

In stock

Add to quote

Aei Dk 9830 Change Password [upd] 【2026 Edition】

To change the password on your AEI DK-9830 keypad, you must first enter programming mode using your current Master Code. Once inside, you can update the Master Code (the "programming password") or the individual User Codes used to unlock the door. 1. How to Change the Master Code

Disconnect Power: Turn off or unplug the 12V DC power supply. aei dk 9830 change password

Enter Programming Mode: Press 0000 (or your current master code) followed by the * or ** key (depending on the specific sub-model firmware). Enter the Change Command: Press 0 followed by the # key. Input New Code: Enter your new 4 to 8-digit master code. Confirm: Press the # key again to save. Exit: Press the * key to leave programming mode. Changing/Adding User Passwords User codes are stored in slots (User Numbers). Enter Programming Mode: Use your Master Code + *. To change the password on your AEI DK-9830

Pro Tip: Write the new password down in a sealed envelope stored in a company safe. Do not tape it to the back of the machine. New master code must be 6 digits (between

Abstract

This paper designs, analyzes, and evaluates a secure password-change mechanism for the AEI DK 9830 device (assumed embedded/networked appliance). It covers threat model, security goals, cryptographic protocols, implementation details, usability considerations, backward-compatibility, and deployment guidance.

  • New master code must be 6 digits (between 000000 and 999999).
  • After pressing #, you’ll hear confirmation beeps.

Related products

To change the password on your AEI DK-9830 keypad, you must first enter programming mode using your current Master Code. Once inside, you can update the Master Code (the "programming password") or the individual User Codes used to unlock the door. 1. How to Change the Master Code

Disconnect Power: Turn off or unplug the 12V DC power supply.

Enter Programming Mode: Press 0000 (or your current master code) followed by the * or ** key (depending on the specific sub-model firmware). Enter the Change Command: Press 0 followed by the # key. Input New Code: Enter your new 4 to 8-digit master code. Confirm: Press the # key again to save. Exit: Press the * key to leave programming mode. Changing/Adding User Passwords User codes are stored in slots (User Numbers). Enter Programming Mode: Use your Master Code + *.

Pro Tip: Write the new password down in a sealed envelope stored in a company safe. Do not tape it to the back of the machine.

Abstract

This paper designs, analyzes, and evaluates a secure password-change mechanism for the AEI DK 9830 device (assumed embedded/networked appliance). It covers threat model, security goals, cryptographic protocols, implementation details, usability considerations, backward-compatibility, and deployment guidance.