Alcor+mp+200717+install [best] -
AlcorMP 20.07.17 is a specific version of a Mass Production (MP) tool used to repair or reflash USB flash drives that use Alcor Micro
Before starting, ensure you have the correct software environment to avoid driver conflicts.
Driver Warning: The tool may install a temporary driver (mpszfilt.sys). If the program crashes, your USB ports might stop working until you restart the tool and close it properly to trigger the uninstallation of this driver. 3. Running the Tool alcor+mp+200717+install
Identify Your Controller: Use a tool like ChipGenius to verify that your flash drive actually uses an Alcor Micro controller.
Flash Type: Usually set to "Auto," but you can manually select your NAND flash if the tool fails to auto-detect it. AlcorMP 20
Low-Level Formatting: This process is destructive. All data will be permanently erased.
Disclaimer: Modifying USB firmware carries inherent risk. The author is not responsible for data loss or hardware damage. Always use a sacrificial drive for testing. Linux: Identify Your Controller: Use a tool like
: Ensure your drive uses an Alcor Micro chip (e.g., AU698x series) using a tool like ChipGenius before proceeding. Installation & Execution Steps Download and Extract : Obtain the version from a reputable source like Alcor Infotech . Extract the file to a dedicated folder on your desktop. Run as Administrator : Right-click AlcorMP.exe and select Run as Administrator Select Mode : If prompted upon startup, choose between (for basic repair/bad block scanning) or (for standard production/formatting). Connect Device
Українська
Русский
Română
English
Español
Polska