Altoc: Vtm 10

The Altoc VTM 10 is a modern control panel specifically designed for managing fan coil units (fancoils) and heat emitters. It is primarily distributed by HVAC specialists like ABK-Qviller. Key Features

Step-by-Step for CPUs:

  1. Clean Surface: Use isopropyl alcohol (90%+) to remove old paste.
  2. Pre-Heat (Optional): If the room is cold, warm the syringe in your hand for 2 minutes. This lowers viscosity slightly.
  3. The "X" or "Spreader" Method: Apply a thin "X" across the CPU IHS, or use the included spatula (if provided) to spread a uniform layer across the entire surface. Because VTM 10 is non-conductive, covering the entire IHS edge-to-edge is safe.
  4. Mounting Pressure: Unlike low-viscosity pastes that squish out, Altoc VTM 10 requires consistent mounting pressure. Tighten cooler screws in a star pattern to ensure the matrix fills microscopic gaps without being fully displaced.

The VTM 10 is characterized by its user-friendly design and technical versatility. It is typically installed in standard wall boxes (1.5") and features a backlit LCD touchscreen that provides an intuitive interface for end-users to adjust temperature and fan settings. Key Technical Features Intuitive Control Interface altoc vtm 10

Best used for: High-volume PCR testing and situations where minimizing the risk of secondary infections for healthcare or transit staff is the top priority. The Altoc VTM 10 is a modern control

| Sensor Type | Terminal A (IN+) | Terminal B (IN-) | | --- | --- | --- | | 0-10 V voltage | Signal + | Common / GND | | 4-20 mA current | Signal + (via 250Ω internal shunt) | Common | | Thermocouple Type K | TC+ (positive lead) | TC- (negative lead) | | Pt100 (3-wire) | White (sense+) | Red (excitation) and White (return) | Clean Surface: Use isopropyl alcohol (90%+) to remove

Mastering Your Climate: A Deep Dive into the Altoc VTM 10 Control Panel

5. Calibration and Configuration Deep Dive

Even the best transmitter drifts over time. Altoc recommends a calibration interval of 12 months for critical applications, 24 months for general use.

Our Helpline number: 080-69796266, or Write to

Test cities are allotted on first-come, first-serve basis and subject to availability
HOW TO APPLY? CLICK HERE TO VIEW COMEDK UGET Exam Brochure-2026 COMEDK Quick Guide

Altoc: Vtm 10

Karnataka Professional Colleges Foundation, in their endeavour to offer an effective, fair and objective testing procedure to determine merit of students seeking admission to the member institutions, have formed “Consortium of Medical, Engineering and Dental Colleges of Karnataka” (COMEDK).

COMEDK has been assigned the task of organising a common entrance test for the academic year 2026-2027.

COMEDK entrance test & publication of test score and rank list will be followed by centralized counseling (Single window system).

The Altoc VTM 10 is a modern control panel specifically designed for managing fan coil units (fancoils) and heat emitters. It is primarily distributed by HVAC specialists like ABK-Qviller. Key Features

Step-by-Step for CPUs:

  1. Clean Surface: Use isopropyl alcohol (90%+) to remove old paste.
  2. Pre-Heat (Optional): If the room is cold, warm the syringe in your hand for 2 minutes. This lowers viscosity slightly.
  3. The "X" or "Spreader" Method: Apply a thin "X" across the CPU IHS, or use the included spatula (if provided) to spread a uniform layer across the entire surface. Because VTM 10 is non-conductive, covering the entire IHS edge-to-edge is safe.
  4. Mounting Pressure: Unlike low-viscosity pastes that squish out, Altoc VTM 10 requires consistent mounting pressure. Tighten cooler screws in a star pattern to ensure the matrix fills microscopic gaps without being fully displaced.

The VTM 10 is characterized by its user-friendly design and technical versatility. It is typically installed in standard wall boxes (1.5") and features a backlit LCD touchscreen that provides an intuitive interface for end-users to adjust temperature and fan settings. Key Technical Features Intuitive Control Interface

Best used for: High-volume PCR testing and situations where minimizing the risk of secondary infections for healthcare or transit staff is the top priority.

| Sensor Type | Terminal A (IN+) | Terminal B (IN-) | | --- | --- | --- | | 0-10 V voltage | Signal + | Common / GND | | 4-20 mA current | Signal + (via 250Ω internal shunt) | Common | | Thermocouple Type K | TC+ (positive lead) | TC- (negative lead) | | Pt100 (3-wire) | White (sense+) | Red (excitation) and White (return) |

Mastering Your Climate: A Deep Dive into the Altoc VTM 10 Control Panel

5. Calibration and Configuration Deep Dive

Even the best transmitter drifts over time. Altoc recommends a calibration interval of 12 months for critical applications, 24 months for general use.

Facts about ComedK

200000+
Students

150+
Colleges

400+
Exam Centers

200+
Cities
altoc vtm 10

Engineering Colleges

altoc vtm 10

Architecture Colleges

altoc vtm 10

Medical Colleges

altoc vtm 10

Dental Colleges

“Consortium of Medical, Engineering and Dental Colleges of Karnataka”
Privacy Policy

www.comedk.org is the only official website of COMEDK. COMEDK is not responsible for information available on any other websites.

Copyright PJ Vine © 2026