The Canon MAXIFY MB2140 Service Tool is a specialized software utility used primarily to address critical maintenance issues, such as the Support Code 5B00, which indicates that the waste ink absorber is full. In 2021, users often sought updated versions like v5103 or v6100 to ensure compatibility with modern firmware. Understanding the Support Code 5B00

Canon MAXIFY MB2140 Service Tool (often associated with 2021-era versions like

Step 1: Enter Service Mode on Canon MB2140

  1. Turn off the printer using the power button.
  2. Unplug the power cord from the wall.
  3. Wait 10 seconds. Plug it back in.
  4. Hold down the Stop/Reset button.
  5. While holding Stop/Reset, press and hold the Power button.
  6. Keep holding Power, then release Stop/Reset.
  7. While still holding Power, press Stop/Reset twice.
  8. Release the Power button.
  9. The screen will remain blank, but the green power light will flash slowly, then remain steady – Service Mode activated.

But that night, as he reviewed client contracts, the printer started on its own. A low, rhythmic hum, followed by a single page ejecting into the tray. Leo picked it up. It wasn’t a document he’d sent.

Clear the Counter: In the tool interface, look for the "Main" or "Ink Absorber Counter" section and click Set. A successful reset will result in a "Value has been initialized" popup. A Word of Caution

EEPROM Operations: Allows you to read and write EEPROM data, which is useful for checking the printer's detailed history, including total page counts and error logs.

He just shrugged, pulled the service tool folder onto a USB drive, and tucked it into his pocket.

Safety & legality

He connected the printer via USB, selected “MB2140” from the list, and clicked “Main Pad Counter – Reset.”

Go to top

Canon Mb2140 Service Tool 2021 May 2026

The Canon MAXIFY MB2140 Service Tool is a specialized software utility used primarily to address critical maintenance issues, such as the Support Code 5B00, which indicates that the waste ink absorber is full. In 2021, users often sought updated versions like v5103 or v6100 to ensure compatibility with modern firmware. Understanding the Support Code 5B00

Canon MAXIFY MB2140 Service Tool (often associated with 2021-era versions like canon mb2140 service tool 2021

Step 1: Enter Service Mode on Canon MB2140

  1. Turn off the printer using the power button.
  2. Unplug the power cord from the wall.
  3. Wait 10 seconds. Plug it back in.
  4. Hold down the Stop/Reset button.
  5. While holding Stop/Reset, press and hold the Power button.
  6. Keep holding Power, then release Stop/Reset.
  7. While still holding Power, press Stop/Reset twice.
  8. Release the Power button.
  9. The screen will remain blank, but the green power light will flash slowly, then remain steady – Service Mode activated.

But that night, as he reviewed client contracts, the printer started on its own. A low, rhythmic hum, followed by a single page ejecting into the tray. Leo picked it up. It wasn’t a document he’d sent. The Canon MAXIFY MB2140 Service Tool is a

Clear the Counter: In the tool interface, look for the "Main" or "Ink Absorber Counter" section and click Set. A successful reset will result in a "Value has been initialized" popup. A Word of Caution Turn off the printer using the power button

EEPROM Operations: Allows you to read and write EEPROM data, which is useful for checking the printer's detailed history, including total page counts and error logs.

He just shrugged, pulled the service tool folder onto a USB drive, and tucked it into his pocket.

Safety & legality

He connected the printer via USB, selected “MB2140” from the list, and clicked “Main Pad Counter – Reset.”