Skip to main content

Cobra 3195 Alarm Manual Full 'link' Official

Cobra 3195 is a comprehensive vehicle security system featuring ultrasonic sensors, engine immobilization, and a high-power battery backup siren. This report compiles key operational procedures and technical details derived from its standard manual. System Operations Arming & Disarming

LED Signals:

Open the door with the mechanical key (the alarm will sound). Switch the ignition cobra 3195 alarm manual full

1. Quick‑Start Summary

| Step | Action | Details | |------|--------|---------| | 1 | Power the Unit | Connect the power adapter (12 V DC, 1 A) to the rear power jack. The unit will power up within a few seconds and the LCD will show “‑‑‑”. | | 2 | Set the Date & Time | Press MENU → SETUP → TIME/DATE. Use the ▲/▼ keys to adjust, ENTER to confirm. | | 3 | Select the Alarm Mode | Press MODE until you see OFF / HOME / AWAY on the display. Each mode has a different sensor sensitivity (see “Alarm Modes” below). | | 4 | Arm the System | Press ARM. The LCD will flash “ARMING” for 30 s (you can adjust the delay in the menu). After the countdown the display shows the selected mode (HOME or AWAY). | | 5 | Disarm | Enter your 4‑digit PIN on the keypad and press ENTER. The system returns to OFF. | | 6 | Test Sensors | From the main screen press TEST → choose a zone → ENTER. The sensor will beep and the LCD will indicate “OK” or “FAIL”. | Cobra 3195 is a comprehensive vehicle security system

  • Training: Provide users with comprehensive training on system operation and troubleshooting.
  • Regular maintenance: Schedule regular maintenance and testing to ensure system operation.
  • System upgrades: Consider upgrading the system to take advantage of new features and technologies.

Programming & operation (typical functions)

  • Arm: press remote lock button — system locks doors (if wired) and arms sensors.
  • Disarm: press unlock — system disarms and unlocks doors.
  • Silent arm/disarm: press button sequence (check manual).
  • Valet mode: toggle with valet switch to temporarily disable alarm.
  • Panic: hold specific button to trigger siren.
  • Programming mode: enter with valet switch and remote sequences to set options (chirps, locking behavior, sensor sensitivity).
  • What is the Cobra 3195 alarm system? The Cobra 3195 alarm system is a state-of-the-art alarm system designed to provide maximum protection for your vehicle.
  • How do I install the Cobra 3195 alarm system? Installing the Cobra 3195 alarm system requires some technical expertise. Consult the Cobra 3195 alarm manual full for detailed instructions.
  • How do I operate the Cobra 3195 alarm system? Use the remote control to arm and disarm the system, and consult the Cobra 3195 alarm manual full for detailed instructions on operation and troubleshooting.

Turn ignition ON again and repeat for the remaining three digits. Training : Provide users with comprehensive training on