Disco 240 Dmx Controller Manual ((exclusive))

Faders: 8 physical channel faders with a page select button (Page A: 1–8, Page B: 9–16). disco 240 dmx controller manual

1. Selecting a Fixture: Choose the type of lighting fixture you want to control using the Fixture button.
2. Setting the DMX Channel: Select the DMX channel you want to control using the Channel button.
3. Adjusting Intensity: Use the faders to adjust the intensity of the lighting fixture.
4. Changing Colors: Use the faders to adjust the color of the lighting fixture (if applicable).

Add Scenes: Select the Bank and Scene you want to add, then press MIDI/ADD. Repeat: Add as many scenes as you need for your sequence. Exit: Hold Program for 3 seconds to save and exit. 6. Playback and Performance Once programmed, you can trigger your show in three ways: The Disco 240 DMX Controller Go to product

: For complex shows, users often save favorite setups as presets for quick recall. Selecting a Fixture : Choose the type of

Manual Mode: Press the Manual button. The corresponding fixture LED will light up.

To Play a Chase:

1. Exit Program Mode.
2. Press Auto. The chase will run.
3. To adjust speed: Use the Speed Fader (some models have a dedicated pot) or tap the Tap button twice (quarter notes).
4. For sound activation: Press Music. The chase will advance to the beat of the microphone.

Troubleshooting