Drembo M6 Mixer User Manual -

Table of Contents

Here's a step-by-step guide to operating the Drembo M6 Mixer: drembo m6 mixer user manual

6) Cleaning & maintenance

  • Unplug before cleaning.
  • Detachable metal attachments and bowl: wash in warm, soapy water; many are dishwasher-safe—check markings or manual.
  • Motor housing: wipe with damp cloth; do not allow liquids into vents.
  • Grease/drive area: periodically inspect for food buildup; wipe with dry cloth.
  • Storage: store attachments inside bowl or dry, ventilated area. Coil cord without tight kinks.

PAN Knob: Controls the left/right stereo balance in the main output. Table of Contents Here's a step-by-step guide to

  • Motor power: 5.5 kW (7.5 HP)
  • Mixing capacity: 200-500 liters (53-132 gallons)
  • Speed range: 30-200 RPM
  • Weight: 120 kg (264 lbs)
  • FX Knob: This controls the amount of digital effect (usually Reverb or Delay) applied to that specific channel.
  • Monitor/Headphone Volume: Controls the level of the sound coming through your headphones plugged into the front of the unit.
  • Main Mix Fader: The master volume control for the outputs going to your speakers or computer.

    • Connects directly to a PC via USB for power and audio recording/playback without extra drivers. 48V Phantom Power: Available on mic channels for condenser microphones. DSP Effects: Unplug before cleaning

    Pair your phone by searching for "Drembo" or similar generic identifiers in your Bluetooth settings. Recording to PC

    : Turn all gain and volume knobs to "zero" before turning on the device to avoid signal spikes. Connecting Microphones Plug XLR or 1/4" cables into the If using a condenser mic, press the +48V Phantom Power Adjusting Sound control to set the input level. If the flashes, reduce the gain. Adjust the (High and Low) to shape the tone of each channel. FX control to add internal effects to the signal. Using Bluetooth/USB