Manual Upd | Eclipse Avn133mrc English

Eclipse AVN133MRC is a Japanese-market memory navigation system. While an official English-language manual specifically for this model does not exist, you can operate and understand the device using a combination of translated documentation and visual aid tools. Quick Reference Guide

Procedure:

  1. Turn the car ignition to ACC or ON (engine can be off, but battery must be strong).
  2. Turn the AVN133MRC OFF (press and hold the Volume knob until screen goes black).
  3. Insert the prepared USB drive into the USB port (usually in the center console).
  4. Turn the unit ON by pressing the Volume knob.
  5. If the file is correct, a black screen will appear with white text:
    Update file found. Press "OK" to start.
    (If you see "No file" – reformat USB or try a different port).
  6. Press the "OK" touch button (bottom right of screen).
  7. DO NOT TOUCH ANYTHING FOR 15 MINUTES. The bar will progress from 0% to 100%, may pause at 50% for 2-3 minutes – this is normal.
  8. When complete, the unit will announce: Update successful. System will reboot.
  9. The screen will go black, then restart with the Eclipse logo.
  10. Perform a factory reset: Go to SETUP -> System -> Reset All Settings.

2. Understanding Updates for AVN133MRC

This unit supports updates for:

The "MRC" Suffix: This usually indicates a specific map card or rental-spec version, meaning the core hardware follows standard Eclipse AVN wiring. 🛠️ Common Setup Steps (In English) eclipse avn133mrc english manual upd

3. How to Check Your Current Versions

  1. Power on the unit.
  2. Go to Menu → Settings → System Information (or "Version Info").
  3. Note: