Epson Printer Resetter L3250 May 2026

Epson L3250 Resetter (also known as the Adjustment Program) is a utility used to resolve the "Service Required" error, which occurs when the printer's waste ink pad counter reaches its limit and stops the machine from printing. When Do You Need a Resetter?

Error Clearance: It clears the "A printer's ink pad is at the end of its service life" message. Epson Printer Resetter L3250

: When this counter reaches a predefined limit, the printer ceases all functions and displays a "Service Required" message, typically accompanied by blinking red lights. The Safety Mechanism Epson L3250 Resetter (also known as the Adjustment

Step 5: Run the Resetter

Epson printers use internal pads to soak up excess ink during cleaning cycles. To prevent ink from leaking, the printer has a counter that stops all operations once it believes these pads are full. A resetter tool Open the resetter program (run as administrator if

For L3250, the most common is AdjProg (Epson Adjustment Program) version specific to L3100/L3150/L3250 series.

Step 2 – Run the Resetter

  1. Open the resetter program (run as administrator if on Windows).
  2. Select the correct USB port (the tool will list connected Epson printers).
  3. Click “Particular adjustment mode” (or similar wording).
  4. Look for “Waste ink pad counter” or “Initial fill flag”.
  5. Tick both checkboxes (Main pad + Platen pad).
  6. Click “Check” to read current values – they’ll be near 100% or a high number like 20000.
  7. Click “Initialization” or “Reset”.
  8. Wait for the progress bar to finish. The counter should now show 0%.

Method C — Contact Epson or Authorized Service

  • If you prefer official support or the printer shows physical issues, contact Epson support or an authorized service center for a safe reset and pad replacement.