How To Install Olivetti Pr2 Plus Printer On Windows 10 [verified] May 2026

How to Install Olivetti PR2 Plus Printer on Windows 10: The Complete Guide

The Olivetti PR2 Plus is a legendary printer, widely used in banking, aviation, and retail environments for printing checks, tickets, and multi-part forms. Known for its rugged reliability and exceptional speed, it’s a favorite for high-volume impact printing. However, installing this printer on a modern operating system like Windows 10 can be tricky. Windows 10 does not natively recognize the PR2 Plus, and the printer uses a proprietary command set (Olivetti Standard, or IBM Proprinter emulation in some modes).

  1. Go to Printers & scanners → click your printer → Printer properties
  2. Ports tab → select your COM port → Configure Port
  3. Match these typical PR2 Plus settings:
    • “Olivetti PR2 Plus (Tractor)”
    • “Olivetti PR2 Plus (Single Sheet)”
  4. Set serial parameters if required by your POS software (commonly 9600 or 19200 baud, 8 data bits, no parity, 1 stop bit). These may be changed in your POS app or via the printer’s configuration utility if provided.

Compatibility Mode: If the driver doesn't install or work properly, try right-clicking on the installation executable, choosing Properties, then under the Compatibility tab, checking Run this program in compatibility mode for: and selecting an older version of Windows (like Windows 7 or XP) and running it as administrator. how to install olivetti pr2 plus printer on windows 10

4. Test printing

  • Open Notepad → type something → Print → select your PR2 Plus.
  • If it prints garbage characters, the baud rate or flow control is wrong.

Installing an Olivetti PR2 Plus passbook printer on Windows 10 can be tricky because the system often fails to recognize it automatically. This guide provides a step-by-step walkthrough to get your hardware communicating perfectly with your PC. Preparing for Installation How to Install Olivetti PR2 Plus Printer on

Option A: The Reliable "Generic" Method (Recommended) Windows 10 has a built-in driver that works perfectly for the PR2 Plus. Go to Printers & scanners → click your