Ir2110 Proteus Library [DIRECT]

Creating and Using an IR2110 Proteus Library for Power Electronics Simulations

In Proteus, the IR2110 library component is primarily used to simulate:

Key Features:

• Floating channel designed for bootstrap operation – fully operational to +500V or +600V (depending on version)
• Tolerant to negative transient voltage (dV/dt immune)
• Gate drive supply range from 10V to 20V
• Under-voltage lockout (UVLO) for both channels
• Matched propagation delay for both channels – typically 120 ns
• Output compatible with CMOS and LSTTL logic levels

B. Use a Different Gate Driver with Existing Library

Components available natively in Proteus (or easily found): ir2110 proteus library

4. Simulation Graph

serves as a critical interface in power electronics simulation. It bridges low-voltage logic (like a microcontroller) and high-voltage power stages (like a bridge motor driver). In a simulation environment like Creating and Using an IR2110 Proteus Library for

: You must include a capacitor (typically 0.1µF to 1µF) between the pins for high-side switching. Supply Voltages (logic supply) and (power supply) correctly; VCC typically ranges from 10V to 20V : Ensure the logic ground ( ) and power ground (

: Close and reopen the software to refresh the database. You should now find "IR2110" in the Pick Devices 3. Simulation Checklist Floating channel designed for bootstrap operation – fully

Locate Proteus Library Folder: Find where Proteus is installed on your computer.