It Cannot Find The Meta Usb Com Port For Modem Handshake

When a modem or a similar device fails to establish a handshake due to an inability to find the Meta USB COM port, it usually indicates a problem with the device's connection, driver issues, or a configuration mismatch. Here are several steps you can take to troubleshoot and potentially resolve the issue:

The Fix: You must disable Driver Signature Enforcement via the Advanced Startup menu before installing your drivers. Once disabled, reinstall the MTK VCOM USB Drivers through the Device Manager. 2. Verify Your Drivers in Device Manager The error often stems from a missing or mismatched driver. it cannot find the meta usb com port for modem handshake

"It cannot find the Meta USB COM port for modem handshake." When a modem or a similar device fails

Step 2: Install Correct Drivers (Windows Focus)

• Disable driver signature enforcement (temporarily, if required).
• Install MediaTek USB VCOM drivers (v1.1123.00 or newer) or Spreadtrum/Unisoc USB drivers.
• After installation, check Device Manager > Ports (COM & LPT). Look for "MediaTek USB Port" or "Meta Mode COMx" when the device is connected and powered appropriately.

If your device has a removable battery, take it out, wait 10 seconds, put it back in, and connect it powering it on. Button Combos: Most devices require holding Volume Down both Volume buttons while plugging in the USB cable to trigger Meta Mode. 🖥️ 4. Clean Your COM Ports If your device has a removable battery, take

• MediaTek USB Port (COMx) or
• USB Serial Port (COMx) or
• MTK USB Debug Port or
• Preloader USB VCOM Port