Leica Tcr805 Total Station User Manual Work ((exclusive)) [ 2024 ]

Mastering the Leica TCR805 Total Station: A Comprehensive Guide to User Manual Work

Keywords: Leica TCR805 total station user manual work, surveying setup, EDM calibration, data recording

Manual Settings for Transfer:

  • Telescope: 30x magnification with a focusing ring.
  • Vertical/Horizontal Tangent Screws: For fine adjustments.
  • Electronic Level: Displayed on the LCD for precise leveling.
  • Battery Compartment: Holds the GEB111 or GEB121 battery.
  • Data Ports: RS232 serial interface for data transfer.
  • Job Manager: Before shooting any points, you must create or select a Job. This ensures all data is stored in the correct file (GSI format).
  • Point Manager: Used to view, edit, or delete stored coordinates.
  • Code Manager: Allows you to select feature codes (e.g., "FENCE", "TREE") to attach to measured points for post-processing.

Step 3: Leveling the Instrument (The Manual's 3-Screw Method)

  1. Rotate the alidade so the plate level is parallel to two leveling screws.
  2. Turn both screws in opposite directions to center the bubble.
  3. Rotate the instrument 90° (grad) and use the third screw to center the bubble.
  4. Repeat until the bubble remains centered in all orientations.
  5. Finally, check the circular level (horseshoe level) on the tribrach. If off, adjust using the hex key as shown on page 2-8 of the manual.
  • Manual step: Enter Point 1 Northing/Easting. Enter Point 2. Press INV. It displays: "Azimuth = 124°32'15", HD = 45.678m".

Part 6: The "Work" of Data Management

User manual work isn't just about field operations—it's about data flow. leica tcr805 total station user manual work

Part 4: The "R" in TCR805 – Mastering Reflectorless Measurement

This is where the manual is non-negotiable. Reflectorless mode is powerful but dangerous for data quality. Mastering the Leica TCR805 Total Station: A Comprehensive