Resetear Impresora Canon G2110 Verified May 2026

To reset your Canon PIXMA G2110 (typically to resolve the 5B00 error or "ink absorber full" message), you must first enter Service Mode and then perform the reset sequence. Step 1: Enter Service Mode Turn off the printer but leave it plugged in.

1. Open the printer – Remove the back cover and bottom tray (requires screwdriver).
2. Locate the waste ink pads – Usually a white sponge pad in the bottom-right corner.
3. Wear gloves – The ink is water-resistant and stains.
4. Remove and wash – Rinse the pad under warm water until water runs clear. Squeeze dry.
5. Reinstall and reset counter again – After physical cleaning, perform the Service Tool reset once more.

Always scan downloaded files with VirusTotal before running. resetear impresora canon g2110 verified

Si los pasos anteriores no liberan el error 5B00, necesitarás el software Service Tool V5103 (o versiones superiores compatibles con la serie G). To reset your Canon PIXMA G2110 (typically to

Prevention: How to Avoid Resetting Again Too Soon

After a verified reset, here is how to extend the life of your waste ink pad: Open the printer – Remove the back cover

Una vez que la luz verde no parpadee más, presiona el botón de Parar (Stop) exactamente 5 veces.

para confirmar el restablecimiento de los ajustes de fábrica. Importante:

✅ This guide covers Waste Ink Counter Reset (5B00) — the most common verified fix.