Resetter Printer Canon | G2010

To reset your Canon PIXMA G2010 printer, you generally need to put it into Service Mode first. This is typically done to fix common errors like 5B00 or P07, which indicate a full waste ink absorber counter. Method 1: Manual Service Mode Reset

Release both buttons. The green power light will flash and then stay steady. Reset the Waste Ink Counter Once in Service Mode (steady green light), press the to confirm the command. resetter printer canon g2010

Release the Stop button (keep Power held), then press the Stop button 6 times. To reset your Canon PIXMA G2010 printer, you

Persistent Glitches: Use a reset if the printer displays persistent paper jam errors even after clearing the paper. After heavy cleaning cycles or frequent head flushes,

Do You Really Need a Resetter for Your Canon G2010?

Yes, in 90% of cases. Without a resetter, your only official option is to send the printer to an authorized Canon service center. The technician will physically replace the waste ink pads and reset the counter, which can cost between $50 and $100—often more than the printer itself.

• After heavy cleaning cycles or frequent head flushes, the printer triggers the “absober full” message and stops printing.
• Following replacement or refilling of ink cartridges when the printer refuses to accept non‑OEM cartridges or reports incorrect ink levels.
• Restoring printer operation following a firmware or service routine that increments internal counters.