Staples 17466 Laminator Manual ((better)) 90%

Here’s a clear, helpful post for someone searching for the Staples 17466 laminator manual.

: The laminator will draw the pouch through and release it from the rear at a speed of approximately 15.7 inches per minute. Troubleshooting & Care Clearing Jams staples 17466 laminator manual

• Pre-heat for 10 minutes – Improves clarity with thicker 3 mil pouches.
• Use a carrier for small items – Fold a cardstock sleeve for business cards.
• No lamination of shiny photos – Heat can cause bubbling; use cold press pouch instead.
• Unplug after use – The 17466 has no auto-shutoff (per manual, this is a safety note).

Speed & Performance: It features a 3–5 minute warm-up time and laminates at approximately 12–15.7 inches per minute. Here’s a clear, helpful post for someone searching

❌ Avoid these mistakes:

• Don’t use hot settings for cold laminate sheets (this unit is thermal only)
• Don’t pull jammed paper forward – you can damage the rollers
• Don’t laminate while red “heating” light is on – wait for green

Tips and Maintenance

Power On: Plug the unit into a grounded outlet. Switch the power button (typically located at the rear) to the ON position. Select Setting: Pre-heat for 10 minutes – Improves clarity with

: To prevent bubbles or wrinkles, ensure you are using the correct pouch size for your document and that the laminator is fully heated.