Tower Crane Dismantling Method Statement Official
Tower Crane Dismantling: A Step-by-Step Method Statement & Safety Guide
Tower cranes are the kings of the construction site—until the job is done. Erecting a crane is complex, but dismantling one is arguably more dangerous. You are working at height, handling heavy loads, and often dealing with tight urban footprints.
: Specific crane details (e.g., Liebherr 154ECH), site address, and planned dates. Personnel & Responsibilities tower crane dismantling method statement
Step 2: Prepare Jib for Stripping
- Walk the jib (using fall arrest system) to remove all pendulum ropes, hook blocks, and auxiliary hook.
- Retract the trolley to the crown (if not already).
Crane Supervisor: Controls the dismantling operation on the ground. Tower Crane Dismantling: A Step-by-Step Method Statement &
- Noise Control: Noise control measures will be implemented to minimize disturbance to nearby residents.
- Waste Management: All waste generated during the dismantling process will be properly disposed of.
- Personal Protective Equipment (PPE): Ensure all personnel wear PPE, including hard hats, safety glasses, and harnesses.
- Fall Protection: Use fall protection equipment, such as safety nets or guardrails, to prevent falls.
- Electrical Safety: Ensure electrical safety by disconnecting power and using lockout/tagout procedures.
- Emergency Response Plan: Establish an emergency response plan in case of accidents or incidents.
Tower cranes are commonly used in construction sites to lift and move heavy loads. However, when a construction project is completed, the tower crane needs to be dismantled and removed from the site. Dismantling a tower crane is a complex process that requires careful planning, specialized equipment, and trained personnel. This method statement outlines the steps and procedures for safely dismantling a tower crane. Walk the jib (using fall arrest system) to
Appointed Person (AP): Responsible for the lift plan and overall safety. Crane Supervisor: Manages the dismantling team on-site.
and valid third-party inspection certificates for all lifting gear, are in place. Site Inspection: