Xtra Safe Kt 82001 Manual May 2026

Since this appears to be a key cutting machine (common in locksmithing and hardware stores), the manual will cover setup, operation, maintenance, and safety. Xtra Safe Kt 82001 Manual

Replacement: The battery compartment is located on the back of the door. Use fresh, name-brand alkaline batteries for consistent voltage. Emergency Override Xtra Safe KT 82001 User Manual: Complete Setup

Load ratings from the manual:

: Remove the cover, insert the emergency override key, and turn it (usually counter-clockwise) while simultaneously turning the knob clockwise to open the door. Install Batteries Cleaning: Wipe the exterior with a damp cloth

Remove the cover: Gently pry it off to reveal the manual keyhole. Insert the key: Push the override key into the lock.

Change batteries immediately if the low-battery warning light (usually red) illuminates. Anchoring:

6. Maintenance & Care

• Cleaning: Wipe the exterior with a damp cloth. Do not use solvents, ammonia, or abrasive cleaners, as these can damage the finish and the electronic seal.
• Lubrication: Every 6–12 months, apply a small amount of graphite powder or Teflon-based lubricant to the moving bolt mechanism. Avoid oil-based lubricants (like WD-40) as they attract dust and gum up the mechanism.
• Keys: Store the emergency override keys in a secure location separate from the safe. Do not leave them inside the safe.