Zd10-100 Datasheet [exclusive]
Title: The Last Datasheet
is a flexible, ultra-thin film pressure sensor designed for high-sensitivity force detection in space-constrained applications. It operates on a resistance-based principle where the sensor's resistance decreases as external pressure is applied. SENSOR+TEST Key Technical Specifications Based on its official technical datasheet , here are the core operating parameters: Pressure Range: 0 to 500g. Response Point: is less than or equal to 20g (threshold to trigger a resistance change). Thickness: is less than or equal to 0.25 mm (ultra-thin profile). Dimensions: Approximately 100 mm in length and 10 mm in width. Extremely fast with a response time of is less than 1 ms and recovery time of is less than 15 Durability: Rated for over 1 million trigger cycles. Operating Temperature: Effective from -20°C to 60°C. Core Features & Applications Flexible Thin Film Pressure Sensor ZD10-100 - Flexniss zd10-100 datasheet
Thermal and power considerations
- Maximum rated power dissipation (1.0 W) assumes adequate ambient cooling and PCB thermal vias/copper; mounting in free air or on small pads reduces allowable Pd.
- For continuous operation near Pd, provide heatsinking (large copper area on PCB or thermal pads) or derate by ambient temperature using the diode’s thermal resistance (RθJA) from datasheet.
- Repeated surge events can degrade junction; use series resistors or current-limiting to keep instantaneous power within safe limits.
4. Low-Cost Shunt Regulator
For low-current loads (e.g., <8 mA), the ZD10-100 can act as a simple shunt regulator, maintaining 10V across a load even if the input voltage fluctuates. Title: The Last Datasheet is a flexible, ultra-thin
Interference: Not sensitive to Electrostatic Discharge (ESD) and produces no Electromagnetic Interference (EMI). Primary Applications Maximum rated power dissipation (1
. These sensors are widely used in medical devices, consumer electronics, and automotive interfaces due to their ultra-thin profile and durability.