Zk-pp2k Manual: !new!

The ZK-PP2K is a dual-mode (PWM and Pulse) signal generator and motor driver module operating at 3.3V–30V, capable of driving loads up to 8A (150W) for motor, valve, or LED control. It features an LCD display, a MOS switch output, and precise control over frequency (1Hz–150kHz) and duty cycle (0–100%). For the full, original technical manual, visit ledsales.com.au ledsales.com.au

Step 1: Connecting Power and Basic Wiring

Plug the 5V DC adapter into a surge-protected outlet. Do not plug the device into a power strip shared with heavy machinery (motors, refrigerators) as voltage fluctuations can damage the fingerprint sensor. Zk-pp2k Manual

• Input Voltage: 6V – 40V DC
• Output Voltage: 0V – 36V DC (Adjustable)
• Output Current: 0A – 5A (Continuous), up to 8A peak (with heat sink/fan)
• Output Power: Max 150W (e.g., 30V @ 5A)
• Conversion Efficiency: Up to 96%
• Protection: Over-temperature, over-current, short-circuit

• NO (Normally Open) and COM to an electric strike lock.
• Connect a 12V power supply separate from the terminal.