Zkteco Ua300 Factory Reset

To factory reset a ZKTeco UA300 terminal, you can use several methods depending on whether you have administrator access to the device menus or are locked out. Method 1: Using the Device Menu (Admin Access Required)

Post-Reset Default Settings

After a successful factory reset, use the following default credentials to access the menu: zkteco ua300 factory reset

Comparison with Other ZKTeco Models

| Feature | UA300 | K30/K40 (Similar) | K20/M20 (Touch) | | :--- | :--- | :--- | :--- | | Factory Reset via Menu | No | No | Yes (in System Settings) | | Button Combo Required | Yes (OK + Power) | Yes (ESC + Power) | No | | Retains IP after Reset | No (resets to default) | No | No (resets to default) | | User Data Recovery | Impossible | Impossible | Impossible | To factory reset a ZKTeco UA300 terminal, you

  • Fingerprint, RFID card, and password verification
  • TCP/IP, USB, and RS232/485 communication
  • Internal flash memory (user templates, logs, settings)
  • Take a metal paperclip, tweezers, or a jumper cap.
  • While the device is still powered off, touch both pins simultaneously with the metal tool.
  • Keep the short active.

Steps:

  1. On your PC, create a new text file. Rename it exactly: reset.dat

    Always remember to backup your data before resetting. With this guide, you can confidently perform a factory reset on any ZKTeco UA300 model, minimizing downtime and keeping your access control system running smoothly. Take a metal paperclip, tweezers, or a jumper cap